Process Equipment and Plant Design MCQs with answers Page - 5

Here, you will find a collection of MCQ questions on Process Equipment and Plant Design. Go through these questions to enhance your preparation for upcoming examinations and interviews.

To check the correct answer, simply click the View Answer button provided for each question.

Have your own questions to contribute? Click the button below to share your MCQs with others!

+ Add Question

A

Admin • 802.91K Points
Coach

Q. Rate of filtrate delivery is inversely proportional to the

  • (A) Filtering area & the pressure difference driving force
  • (B) Viscosity of filtrate
  • (C) Cake & filter medium resistance
  • (D) Both A & B

A

Admin • 802.91K Points
Coach

Q. Holes of a sieve tray are arranged in triangular pitch of __________ times the hole diameter.

  • (A) 1.5 to 2
  • (B) 2.5 to 5
  • (C) 5 to 10
  • (D) 10 to 15

A

Admin • 802.91K Points
Coach

Q. In a pressure vessel containing multiple openings of various dimensions at different parts, stress concentration at the edges of the opening is maximum which becomes negligibly small beyond the area covered by __________ times the hole diameter.

  • (A) Two
  • (B) Five
  • (C) Ten
  • (D) Twenty

A

Admin • 802.91K Points
Coach

Q. For storing hazardous chemicals in large storage tanks, the minimum safe distance between the two tanks should range between __________ times the tank diameter.

  • (A) 1 to 1.5
  • (B) 2.5 to 3.5
  • (C) 4 to 5
  • (D) 6 to 8

A

Admin • 802.91K Points
Coach

Q. Baffle width is normally taken as __________ times the tank diameter.

  • (A) 0.1- 0.12
  • (B) 0.4 - 0.5
  • (C) 0.45 - 0.6
  • (D) 0.2 - 0.45

A

Admin • 802.91K Points
Coach

Q. Baffle spacing is generally __________ the I.D. of the shell.

  • (A) More than
  • (B) Not greater than
  • (C) Not less than one fifth of
  • (D) Both B and C

A

Admin • 802.91K Points
Coach

Q. In a shell and tube heat exchanger, tube side __________ of the mass velocity.

  • (A) Heat transfer co-efficient is proportional to 0.8th power
  • (B) Pressure drop is proportional to the square
  • (C) Both A & B
  • (D) Neither A nor B

A

Admin • 802.91K Points
Coach

Q. In case of 1.5" heat exchanger tubes, the inside flow area __________ with decrease in BWG.

  • (A) Increases
  • (B) Decreases
  • (C) Remains same
  • (D) None of these

A

Admin • 802.91K Points
Coach

Q. Overall tray efficiency of a distillation column is the ratio of the number of

  • (A) Overall gas transfer units to the number of ideal trays required
  • (B) Ideal trays required to the number of real trays required
  • (C) Real trays required to the number of ideal trays required
  • (D) None of these

A

Admin • 802.91K Points
Coach

Q. Wind load consideration in the design of a support can be neglected, when the vessel is

  • (A) Tall (say 30 metres), but is full of liquid
  • (B) Tall but empty
  • (C) Short (< 2 m) and housed indoor
  • (D) None of these

Add MCQ in this Category

If you want to share an MCQ question in this category, it's a great idea! It will be helpful for many other students using this website.

Share Your MCQ

Browse Categories

Click on category to learn MCQs of that category.